WS185 | 2017 154HP Turbo R Models

What's Included?
~ DynoJet Power Vision PV3
~ WSRD Stock Injector Calibrations

WSRD Stock Injector Tune Files will come preloaded onto the Power Vision with installer ease.

WS185 Tune Features:

• Boost pressures are increase up to 16 PSI respectively for the octane you choose to run.
• Crack pressure set to 8 PSI (ensure a minimum of 5 threads exposed on the factory wastegate rod when the jamb nut is tight to ensure the actuator has enough travel to control the wastegate flapper/boost)
• Radiator fan activation temp lowered from ~200* F to ~165* F
• Intercooler fan activation temp lowered from ~140* F to ~95*F
• Torque limits for L raised to 100%, reverse raised to 75%
• Component protection mode for fueling lowered to increase torque and horsepower, especially right after the pedal is floored.
• Ignition timing per cylinder is optimized for maximum power as well as drive-ability, careful consideration was used not only for when at wide open throttle, but as well as cruise, throttle transitions, ect.
• Throttle feel and control is thoughtfully improved, to control through a whoop section, on/off feel in short course style racing or playing in the woods, eco mode is improved
  but offers the less aggressive pedal for technical rock sections or simply loading on a trailer.
• Speed limits removed, your speed limit is your rev limiter/gear
• Rev limiter raised to 8900 RPM
• Rough road detection is raised to max to prevent power loss.